ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 30 results ...

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology , 18(05), 1121–37.

• Type: Journal Article
• Keywords: Conflict factors; Construction industry; Construction professionals; Nigeria;
• ISBN/ISSN: 1726-0531
• URL: https://doi.org/10.1108/JEDT-08-2019-0210
• Abstract:
  This paper aims to determine various factors that cause conflict among professionals in the Nigerian construction industry. This study made use of quantitative approach. Questionnaires were used as a form of data collection, and it was distributed to construction professionals such as quantity surveyors, architects, builders, civil engineers, project managers and construction managers in Ondo and Lagos state to ascertain various factors that cause conflict among professionals in the Nigerian construction industry. A total number of 150 questionnaires were distributed, but 135 were received from the respondents that represent 90 per cent of response rate. In this study, the descriptive analysis and exploratory factor analysis were used. The findings from this study show that the major cause of conflict among the professionals is favouritism. This is followed by role ambiguity that occurs due to improper definition of the role of different construction professionals, and it leads to a misunderstanding culminating into conflict. Also, other major causes of conflict among construction professionals in Nigeria include differences in professionals’ experience, differences in level of education, differences in personalities and differences in professionals’ goal and views. It should be emphasized that professionals must avoid and desist from any factors that can cause conflict among them. Strict adherence by construction professionals in Nigeria will encourage free flow of ideas and will help them progress. This will actually lead to improvement on professionals tasks.

Aghimien, D O, Aigbavboa, C O, Oke, A E and Thwala, W D (2019) Mapping out research focus for robotics and automation research in construction-related studies. Journal of Engineering, Design and Technology , 18(05), 1063–79.

Arowoiya, V A, Oke, A E, Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(05), 1193–208.

Asad, M M, Hassan, R B, Sherwani, F, Rind, I A and Maiji, Y (2019) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation. Journal of Engineering, Design and Technology , 18(05), 959–71.

Blindheim, J, Elverum, C W, Welo, T and Steinert, M (2020) Concept evaluation in new product development. Journal of Engineering, Design and Technology , 18(05), 1139–51.

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology , 18(05), 1081–9.

Chaparro, D A, Ying, F J, Rotimi, F E and Egbelakin, T (2020) Commute and labour productivity: investigation of inner city construction sites. Journal of Engineering, Design and Technology , 18(05), 1305–19.

Dave, N, Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology , 18(05), 1321–33.

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology , 18(05), 1269–85.

Derradji, R and Hamzi, R (2020) Multi-criterion analysis based on integrated process-risk optimization. Journal of Engineering, Design and Technology , 18(05), 1015–35.

Eziefula, U G, Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology , 18(05), 1053–61.

Fei, C, Xiahou, P and Wang, F (2020) Design and control of grid connected inverter for harmonic suppression. Journal of Engineering, Design and Technology , 18(05), 1349–56.

Gamil, Y, A. Abdullah, M, Abd Rahman, I and Asad, M M (2020) Internet of things in construction industry revolution 4.0. Journal of Engineering, Design and Technology , 18(05), 1091–102.

Gbadamosi, S L and Nwulu, N I (2020) Optimal planning of renewable energy systems for power loss reduction in transmission expansion planning. Journal of Engineering, Design and Technology , 18(05), 1209–22.

Gharehbaghi, K, McManus, K, Hurst, N, Robson, K and Myers, M (2019) Complexities in mega rail transportation projects. Journal of Engineering, Design and Technology , 18(05), 973–90.

Gupta, N K and Thakre, G D (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology , 18(05), 1357–70.

Jun, Z, Akbar, M A and Xin lei, W (2020) Optimization of design and measurement principle of six-components force/thrust measurement stand. Journal of Engineering, Design and Technology , 18(05), 1371–9.

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology , 18(05), 1241–9.

Li, H, Xia, Q, Wang, L and Ma, Y (2020) Sustainability assessment of urban water environment treatment public-private partnership projects using fuzzy logic. Journal of Engineering, Design and Technology , 18(05), 1251–67.

Mbae, A M and Nwulu, N I (2020) Day-ahead load forecasting using improved grey Verhulst model. Journal of Engineering, Design and Technology , 18(05), 1335–48.

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology , 18(05), 1287–303.

Osman, B and Zhu, H (2020) A virtual educational model on a CNC milling machine including and excluding two methods of fuzzy controllers. Journal of Engineering, Design and Technology , 18(05), 1153–63.

Sibanda, V, Mpofu, K, Trimble, J and Kanganga, M (2019) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology , 18(05), 991–1014.

Singh, T, Kalra, M and Misra, A K (2020) Simplified probabilistic seismic assessment of dampers in tall and braced structures in buildings. Journal of Engineering, Design and Technology , 18(05), 1037–52.

Wang, L (2020) Home intelligent lighting control system based on wireless sensor. Journal of Engineering, Design and Technology , 18(05), 1231–40.

Woju, U W and Balu, A (2020) Fuzzy uncertainty and its applications in reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1175–91.

Woju, U W and Balu, A (2020) Time-dependent safety performance of reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1103–20.

Xia, Y (2020) Research on dynamic data monitoring of steel structure building information using BIM. Journal of Engineering, Design and Technology , 18(05), 1165–73.

Yan, J (2020) 3D printing optimization algorithm based on back-propagation neural network. Journal of Engineering, Design and Technology , 18(05), 1223–30.

Zadok, Y (2019) Project-based learning in robotics meets junior high school. Journal of Engineering, Design and Technology , 18(05), 941–58.